Fleck 5600 econominder settings google4/25/2023 ![]() ![]() I would be derelict to recommend a softener if it would quit working within a few months. Sulfates will foul a softener fairly rapidly. If the softener is already purchased, as in your case, their presence will dramatically increase the amount of salt required for regeneration. If they are too high, a softener would not be adequate. The presence of either or both of theses drastically increases the softener size needed. ![]() Each ppm of manganese must be treated as if it were 136-166 ppm of hardness. This changes the recommended softener size.Įach ppm of iron must be treated as if it were 68-83 ppm of hardness. Failure to do so will result in hardness bleed. If TDS is too high, the softener will need to be regenerated with a higher salt dosage than we would normally use for best efficiency. If pH is out of whack too far in either direction, softener performance will be compromised or resin damage will occur. Magnesium and calcium are the major components of hardness, the first step in softener sizing. When sizing and setting up a softener, a more complete water analysis is necessary in order to ensure we account for other things in the water that will affect softener performance.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |